Kyushu Space Answers Indoor Air Quality Acceptance Criteria
The AIC-1000 air anion concentration meter is designed to attract air (or a gas with ions) to charge positive and negative ions (gas) in the air through a charged parallel polarized electrode plate. The outer two plates remain polarized (positive, Negative) potential. In the middle is a linear detector board. The pores of the air are 4 MM and the potential of the polarized zone is 1000 V/M. Both positive ions and negative ions can be measured. It can also measure the negative ion concentration of the body, such as cloth, fiber and so on.
Air ion concentration meter technical parameters
Air flow rate: 200CM3 / sec
Measure positive and negative ions
Linear speed: 40CM / sec
Ion display: digital display
Reaction time: about 10 seconds
Divided into three gears: low, medium and high ion concentration readings
Minimum detection amount: 10 ions/cm3
Humidity ≤99% RH (non-condensed water)
Working temperature: temperature -20 ° C - +60 ° C
Battery: 9Volt
First, the US AIC1000 air negative ion concentration detector can measure 10 to 2 million negative ion products:
The AIC-1000 Air Negative Ion Detector uses a "parallel plate" test method. The concentration of ions (gas) in the air is measured by a charged parallel polarized electrode plate. Thanks to its overall electrostatic protection and powerful fan, accurate readings are given even in the presence of strong electrostatic fields or windy conditions. Widely used in the detection of negative ion concentration of environmental quality testing, air purifiers, hair dryers, air conditioners, negative ion powder and other products. It is also applicable to academic units, environmental protection systems, negative ion generator R&D institutions, and related display units.
Second, the United States AIC1000 air negative ion concentration detector can measure 10 to 2 million negative ions product features:
1, easy to operate
2, with anti-static interference function, the measurement is more accurate.
3, the response speed is fast, only about 2 seconds to improve the test efficiency
4, small size, light weight, easy to operate
5, affordable, quality assurance.
Third, the US AIC1000 air negative ion concentration detector can measure 10 to 2 million negative ion technical parameters:
Measuring range 10-1999999 ions/cm3
Accuracy ±25%
No low, medium or high ion concentration readings
Stabilization time response time 2 seconds, positive and negative ion switching 10 seconds
Minimum measured value 10 ions/cm3
Crosstalk 1:5000 (ion selectivity, interference between positive and negative ions)
Battery 9V alkaline battery, standby state 10h, measuring 2h
Working humidity ≤99 %RH (non-condensing water)
Working temperature - 20~ +60°C
Size 175×90×65 (mm)
Weight 450g
Fourth, standard configuration
AIC-1000 air negative ion host, grounding wire, instruction manual.



Silicone Bath Brush And Scrubber
Dual Textured and Sided Silicone Handle Bath Back Scrubber, The back scrubber is light weight, easy to rinse out after use.Easy to reach your entire back.The length of the silicone bath towel also works well to apply lotion to the bottom of the foot and heels, even for a person who can't clean and massage his feet easily.Features ,Made of food-grade silicone,Collapsible, nicely made, great quality and durable. Besides, easy to wash and dry.Scrubber with handles,The silicon back scrubber come with handles securely sewn on both sides. The straps make it much easier to reach lower back and it also make it easy to hang dry.Dual sides with different scrubbing texture pads, One is good exfoliating texture without being too rough while the other side is soft for promoting blood circulation and massage.The right dimensions, 27.56 inches in length and 4.33 inches in width. You can put body wash on the silicone bath towel and move it across the back in both directions easily and effectively
YDS are specialized in Silicone Jaw Exerciser,Silicone Bath Brush Scrubber, Silicone Face Scrubber,Silicone Foot Massager Scrubber ,manufacturers from China.
Our Factory Advantages:
1.Mold workshop and 2D and 3D engineer department
2.Solid siliccone compression machine and liquid silicone injection machine
3.Disney and Sedex 4P audit factory
4.ISO 9001,IATF16949,Raw material of FDA LFGB MSDS Certificates
Look forward to your cooperation!
Silicone Bath Brush And Scrubber,Silicone Body Brush,Exfoliating Texture Scrubbing Pad For Shower,Handle Body Washer
Shenzhen Yindingsheng Technology Co., Ltd , https://www.oemsiliconeyds.com