Wardrobe swing door is how to make up the wardrobe door opener purchase considerations
[ Chinese wardrobe net ] [Chinese wardrobe net ] wardrobe flat door simple yet simple design, let the whole home return to the most sincere beauty. How is the wardrobe door opener? In this issue, the Chinese wardrobe nets close the wardrobe door to buy the precautions, which explains the true meaning of high quality life.
The wardrobe swing door is mainly composed of three parts: a door frame with hardware fittings, a door leaf and a door seam.
1. The door frame is determined by the size of the door hole. Generally speaking, the basic size of the door frame is 10-20mm smaller than the size of the door opening. Due to the error caused by the processing, the actual size range after the door frame is manufactured cannot exceed the pre-design. Determined tolerance range.
2. The outer dimensions of the door leaf are calculated according to the determined frame size minus the structural width of the door frame and the size of the reserved door joint. The manufacturing error cannot exceed the tolerance range given by the pre-design.
3. The door joint is composed of two parts: the reserved door seam and the actual door seam:
(1), the actual door joint: the size of the actual door joint is determined according to the accuracy of the equipment used, the proficiency of the operator, the needs of the user, the requirements of the market, etc., if the determined size affects the quality of the product, the shape The appearance is beautiful, even after the lock, the vibrating lock tongue will be ejected. Although it is easy to make, it does not meet the requirements of the market and loses its competitiveness. If it is determined to be small, the accuracy and operation level of the equipment are high, and the appearance is high. Beautiful, but difficult to process, if the actual door joint is too small, it also affects the opening and closing of the door leaf.
[Washing wardrobe door opening precautions]
Consumers should choose the appropriate swing door according to the actual requirements of the door opening size, opening direction and color pattern of the room. In the purchase process, special attention should be paid to checking the quality of the process: special attention should be paid to checking for weld defects such as open welding, missing welding, and unwelded. Observe whether the cooperation between the door leaf and the door frame is dense, whether the gap is uniform, whether the opening is flexible, whether all the joints are dense, and the surface of the door panel should be treated with anti-corrosion treatment. Generally, it should be sprayed and sprayed. The surface of the paint layer should be free of air bubbles, uniform color and large. Most doors also have a rubber seal on the door frame that does not emit a harsh metal impact when the door is closed.
(2), reserved door seam: the so-called reserved door joint is a theoretical door joint value given by the manufacturer in the process of manufacturing the swing door. This value is an absolute value, no tolerance, no error, this value Once given, it becomes an indispensable data in the calculation formula of the door leaf. The given value of this value can be said to have an array, but generally the intermediate value of the actual door seam should be taken.
AUTRENDS INTERNATIONAL LIMITED , https://www.petspetscleaning.com