5 minutes to teach you how to maintain the furniture of different materials
When the furniture is bought home, it should not only be used as a decoration, but it should also play the role of storage, storage and other services for people. After any furniture has been used for a long time, it will inevitably appear faded and worn. If you want to extend the service life of the furniture, you should do the cleaning and maintenance work of the furniture in daily life. Today, Xiaobian will tell you about how the furniture of different materials should be cured.
Wood furniture maintenance
1, soft cotton dust removal often
Use a soft cotton cloth to wipe off the dust on the furniture surface in the direction of the grain. Before dusting, apply a cleanser on a soft cloth. Do not use a dry cloth to wipe the surface of the furniture.
At intervals, use the wet cotton thread that wrings out the moisture to clean the dust from the wooden furniture, then wipe the wooden furniture all over again, then dry it with a clean dry soft cotton cloth.
2, glazing wax can not stop
The glazing of wooden furniture can not be stopped. Apply a small amount of polishing oil to the rag to give the furniture a quick glaze, but you will need to dust the furniture frequently. Because oil can stick to dust, dust and oil can cause furniture to become difficult to clean and prone to scratches.
Liquid waxes are somewhat better than polishing oils. They create a protective layer on the surface of the wood that causes the dust to slip rather than stick, but its protection time is not as long as wax. The sand only needs to be coated with a thin layer to keep the furniture bright for a long time.
3, the treatment of scratches and water marks
Scratches that are accidentally made by veneer furniture and solid wood furniture can be solved with only one crayon. Buy a crayon of similar color to the color of the furniture, apply a few times at the scratch, make sure the wax has covered the scratches, and then apply the wax to the scratched part again.
Water drops that are accidentally dropped on wooden furniture will not form a water mark, and it usually takes a while to disappear. If it is still visible after one month, use a clean soft cloth coated with a small amount of salad oil or mayonnaise to wipe the water mark in the direction of the wood grain. Or cover the mark with a damp cloth, then carefully press the damp cloth several times with an electric iron, and the mark will fade.
Cloth furniture maintenance
1, dry cleaning can maintain life
If the cloth cover is stained, wipe it with a clean cloth and water. To avoid leaving a mark, it is best to wipe it from the outside of the stain. Velvet fabric furniture should not be wet. Dry cleaner should be used. All cloth sleeves and bushings should be cleaned by dry cleaning. Do not wash. Do not bleach.
Usually, avoid wearing sweat, water stains and mud on the furniture, which will stain the furniture and clean it, which will easily damage the service life of the furniture. Dust at least once a week, paying particular attention to removing dust from fabric structures.
2, more flip to prevent wear
Fabric mats or mattresses (mattress decoration renderings), etc. should be frequently converted and turned over once a week to evenly distribute the wear parts. The wall of the furniture should be kept at a gap of 0.5 to 1 cm from the wall to prevent contact with the wall and wear.
Try to avoid many people sitting on the edge of the mattress often, do not step on the mattress to keep the mattress flat and extend the service life; turn the mattress over and over regularly, flip it upside down or end to end, so that the mattress tends to force Uniform, generally should be changed once every 3 months; the contact area of ​​the spring mattress and the bed frame should be placed with a cotton felt or bedding (the effect of the decoration of the bedding) to reduce friction.
3, avoid direct sunlight
Fabric furniture should try to avoid the whole or partial exposure of the outdoor sunlight for a long time. The temperature of overheating will cause the cloth to dry and harden and easily crack.
Therefore, the position of the fabric furniture is best to avoid direct sunlight, or to use a translucent tulle curtain (curtain decoration effect map) to block the direct sunlight, so that the indoor environment can be decorated without affecting the lighting.
Maintenance of leather art furniture
1. Wipe away from alcohol
Newly purchased leather art furniture, wash the wet towel with water, wring it out and wipe off the dust and dirt on the surface of leather art furniture, then use the care agent to gently wipe the surface of the sofa (sofa decoration effect) one or two times (do not use waxy The care product), so that a protective film is formed on the surface of the dermis, so that the dirt in the future is not easy to penetrate into the pores of the leather, which is convenient for future cleaning.
In daily cleaning, wipe with a soft, damp cloth and dry with a dry cloth. It is best to use water or a special detergent, and should not be scrubbed with an alcohol-based detergent.
2, leather cleaner keeps the leather bright
Leather art furniture should avoid oil stains, ballpoint pens, inks, etc. If you accidentally get it, you should immediately clean it with leather detergent. Without leather cleaning agent, you can use a clean white towel with a little alcohol to lightly smudge the stain, then dry it with a dry wet towel, and finally use a protective agent.
When the leather art furniture is used for a long time, the color of the leather will become a little dull. With a rag and fresh milk, you can restore the original silver color of the leather.
3, pay attention to changes in temperature and humidity
When the spring and autumn seasons arrive, the temperature and humidity will change. Under the conditions of damp or drier conditions, the leather will be affected. Leather protective agents can be used to protect the leather sofa and maintain a bright color.
The leather art sofa should be placed in a ventilated area. The placement position should not be too humid or too dry. It is worth noting that it should not be placed in direct sunlight or in the position where the air conditioning vents are facing to avoid the surface of the leather sofa caused by overheating or too cold. Harden or fade.
Maintenance of wrought iron furniture
1, the ground is stable to avoid bumps
The floor where the wrought iron furniture is placed should be flat and stable, and the furniture can be stabilized. If the ground is not flat, the wrought iron furniture will be slightly deformed and the service life of the furniture will be affected. Furniture should not be moved often after it has been placed.
Iron furniture should be protected during handling, and be handled with care; wrought iron furniture should avoid external impact. You can choose to place the furniture in a place where other hard objects are not often encountered to prevent scratching of the paint surface or chrome plating. It is also necessary to avoid the hard object hitting on the furniture. Otherwise, the paint will be peeled off and the paint will be peeled off. The heavy will collapse and leave scars, which will affect the overall appearance.
2, avoid oil, gas, wet, dry
Chrome-plated wrought iron furniture is most afraid of gas and soot. Therefore, wrought iron furniture cannot be placed near gas stoves and coal stoves to prevent gas and fumes from corroding chrome.
Iron furniture should be placed in a dry and ventilated place. It is best not to wipe the surface directly with a damp cloth during the cleaning process. Do not leave the humidifier around it to avoid rusting the furniture. At the same time, try to avoid direct sunlight, in case of metal oxidative deterioration or surface paint retreat and dry cracking.
3, regular dusting and oiling
Iron furniture should be cleaned and dusted regularly, and it will be easy to rust if it is not cleaned for a long time. When dusting, it is best to use a cotton rag and a mild detergent to gently wipe. For dust in the recess, use a soft wool brush to brush off the gap.
Try to avoid splashing acid and alkali syrup that is corrosive to metal. If it is accidentally caught, immediately clean the stain and wipe it with a dry cotton cloth. In order to prevent metal rust, you can regularly wipe the surface part with a small amount of anti-rust oil or sewing machine oil on a cotton cloth. If the furniture has started to have rust spots, you can use cotton yarn oil to coat the rust, so that you can remove the rust, and you should not directly sand the sandpaper and other matte materials, which will grind the paint surface of the metal furniture surface. .
Xianghe Furniture City official website
Animal Foam Toy,Stress Release Ball,Animal Stress Ball,Pu Stress Reliever
Chic Products (China) Co., Ltd. , https://www.chic-gifts.com