High pressure accelerated aging life box performance and test temperature time
First, the high pressure accelerated aging life test box product features:
1. The high-pressure accelerated aging test chamber has an automatic watering function and automatically replenishes water when the water level is too low during the test.
2. The test process is automatically run until the end is completed, and the use is simple.
3. High-pressure accelerated aging test chamber temperature control: LED digital temperature controller can be used for accurate test temperature setting, control and display.
4. High-pressure accelerated aging test chamber timer: LED digital timer, when the temperature inside the pot arrives, the timing is started to ensure the test is complete.
5. Accurate pressure/temperature meter displays the pressure and relative temperature in the pot at any time.
6. The water dispenser automatically discharges the unsaturated vapor during operation to achieve the best steam quality.
7. One-piece silicone door gasket with good gas density and long service life.
8 High-pressure accelerated aging test chamber is polished and durable, beautiful and non-staining.
Accelerated life testing for products related to the defense, aerospace, automotive parts, electronic components, plastics, pharmaceuticals, etc., used in the design phase of the product to quickly expose product defects and weaknesses. It is widely used in the detection of sealing performance of circuit boards, multilayer circuit boards, IC semiconductors, LCDs, magnets, etc., and tests the pressure resistance and airtightness of its products.
Dongguan Aisihao Testing Equipment Co., Ltd. is a professional company specializing in the production of high-pressure accelerated aging life test chambers integrating production, research and development, and scientific research and development. With more than 30 years of industry experience, with international advanced testing equipment and the most advanced technology in the country, and through close cooperation with many domestic research institutes and key institutions, Suntech, Cinda Optoelectronics, has a letter to manufacture, constantly updated technology Develop new products and improve product quality.
Copper nuts made of all kinds of embossed wire (usually lead brass, such as H59, 3604, 3602). Our daily contact with the embedded knurled copper nuts are processed by precision automatic lathes. The reference standard of embedded knurled copper nut comes from GB/T809, but the technical parameters of all kinds of embedded nuts produced by our company exceed the relevant indexes required by the national standard.
Knurling copper nut is mainly used for hardware Spring, shaped spring, craft gift spring, battery spring, spring antenna,key ring, phosphorus copper spring CNC automatic lathe turning parts (copper car parts, iron, aluminum car parts), metal stamping parts, electronic parts, iron shaft, single Rachel,Rachel, iron pin, non-standard Screw nut,fittings,fasteners, wire forming (wire card holder, Model aircraft landing gear, S hook, R latch, triangle buckle, D buckle) and other hardware products, belonging to the copper nut series.
Brass Nut,insert nut,knurled nut,injection nut,hex nut
Shenzhen Lanejoy Technology Co.,LTD , https://www.szcoolingrack.com