How to place bookshelf speakers? What is the difference between a floor speaker and a floor speaker?
The bookshelf speakers are placed in different positions, and the effect is different. This is also a problem that many friends will care about. How to put the bookshelf speakers? The following decoration home decoration network small series will bring you the correct placement of the bookshelf speakers, for your reference.
How to place bookshelf speakers?
1, the regular triangle method: the regular triangle method commonly known as the near-field method. The first condition is that the bookshelf speaker should leave the back wall (at least 1m or more) and the side wall (at least 0.5m or more). The second condition is to draw the two bookshelf speakers and the listening position into an equilateral triangle. The third condition is that the inward projection angle of the two speakers is also 45° or more. The fourth condition is that this regular triangle can be large or small.
2, three three one proportional method: the length of the room is divided into three equal parts (three), the width is also divided into three equal parts (three), the bookshelf speaker placed in the first and second points of the length and width (a) . The speaker can have a slight inward projection angle, even without inward projection, and the listening position should not be placed against the back wall. This method is suitable for spaces with large size and uniform proportion.
3, the wall pendulum method: the bookshelf speaker close to the back wall pendulum, from the back wall 50cm or 30cm, 20cm does not matter, you can deploy. Usually the speaker does not need to project an angle inward. When the high frequency is sharp, the intermediate frequency, and the low frequency is weak, it can make the intermediate frequency and the low frequency full, and the whole high, medium and low frequency can be balanced. However, it also makes the depth of the sound field shallower and narrower. However, it is a good practice to balance the sounds that are harsh and ugly, and to sacrifice the sound field to obtain a good sound.
4, the inner side of the axis: If the listening environment is complex, the sound absorption is asymmetrical, the room is too slender, and the sound of the sound is sharp, the midrange is thin, the bass is not enough, the following "inside axis method" will be better. First place the bookshelf speakers between 1/3 and 1/2 of the length of the room, then place the speakers as far as possible against the side walls. If the room is too wide, it does not have to be close to the side walls. The torsion angle of the speaker should be greater than 45 degrees, and the listening position should be between 0.5m and 1m after the intersection of the projection angles of the two speakers.
5, 317 proportional method: the length of the room is divided into three equal parts (three), the bookshelf speaker is placed in one-third of the length (a), the interval between the two speakers is the length of the room two-thirds of 0.7 Times (seven). The bookshelf speaker should preferably have a slight inward projection angle, but it can be projected without inward, and the listening position should not be placed against the back wall. Effect: This method is used for a space with a large size and a uniform ratio (for example, about 1:1.25:1.6 or about 1:1.6:2.5), and a balanced sound and a wide sound field can be obtained.
6, diamond pendulum method: This method is only used in square space. Think of the square space as the diamond on both sides against the wall. The diamond-shaped sharp corner behind the bookshelf speaker and the diamond-shaped corner behind the listening position should be subjected to cylindrical sound wave diffusion treatment, and the second speaker should not be too close to the side wall. This method deals with the problem that the square space of the square space is too strong. If the square space does not want to be so posed, it is necessary to put a lot of furniture to "resid" the standing wave.
7, the speaker long side wall swing method: If the low-frequency sense of the bookshelf speaker system is not enough, then you can use the long side of the speaker behind the wall pendulum method. However, it should be noted that this kind of pendulum has a loss of sound. Although the sense of medium and low frequency is enhanced, the sound field and depth of the sound will be worse. Therefore, if you want to get a balance between the two, you must rely on it. Move slowly to try. In a rectangular room, the general experience is to use the short side as the back wall of the bookshelf speaker. But this kind of placement is the opposite of the way, the long side is the back wall of the bookshelf speaker.
What is the difference between bookshelf speakers and floor speakers?
First of all, from the appearance, the bookshelf is small in size, usually only 1/3 or 1/4 of the size of a normal floor speaker. On the other hand, unlike the floor-standing speakers, the bookshelf usually only uses two speaker units, one for each of the treble and the bass, and the floor-standing speakers usually have three or more speakers.
Again, due to size limitations, the woofer is not as large as the bass of a floor-standing speaker, usually only 6 inches or even smaller. As for the inner structure of the bookshelf, there is usually only one box, and the bass sound box is not set separately like the floor box.
In addition, a professional pair of tripods is required for the bookshelf to work. It is worth mentioning that the tripod of the bookshelf is very important. It is not only the function of the supporting box, but also reduces the resonance caused by the vibration of the box, so that the sound quality is guaranteed and at the same time, The stand support makes the bass of the bookshelf stronger and more flexible. Therefore, if you buy a bookshelf, it is recommended to use the original professional stand.
The above is how Xiaobian brings you the bookshelf speakers? What is the difference between a floor speaker and a floor speaker? I believe that everyone has a basic understanding of bookshelf speakers after reading this article. If you want to know more about decoration, please click to enter the decoration knowledge channel.
More related wonderful reading:
How to design a children's bookshelf? How to buy children's bookshelf?
How to make a simple bookshelf? What is the price of a simple bookcase?
How is the bookshelf designed? What are the design of the bookshelf?
What are the types of bookshelves? How appropriate is the size of the bookshelf?
What is the size of the home shelves? Bookshelf size
Outdoor Modular seating Furniture
Modular seating furniture that is section sofa or garden set sofa, semi-round design or round design, L design sofa and so on.
Relax and unwind in thick, all-weather seat and back cushions
excellent hand weaving and sofa waterproof fabric, that is your first choice for garden relax.
· Handwoven premium resin wicker UV resistant
· Rust-resistant powder-coated frames
· Cushions included with 30 density sofa foam
· Versatile tempered glass tables
· Cushions also available with 100% waterproof fabric.
Outdoor modular seating furniture with different style and hand weaving
If you have any questions, please contact with us directly. Outdoor Sofa Furniture are produced
by Golden Eagle Outdoor Furniture With High Quality and Good Appearance. Welcome you can visit our Factory.For any inquiry,Please send mail directly to us.
Modular Seating,Wicker Sofa Set,Outdoor Sectional Sofa,Garden Outdoor Sofa
Golden Eagle Outdoor Furniture Co., LTD. , https://www.gegardenfurniture.com