Powder packaging machine how to maintain?

[China Packaging Network News] advanced automation model not only effectively improved the company's production efficiency, product packaging quality has also been better protected. Therefore, large-scale powder packaging machines and multi-row powder packaging machines have become one of the preferred packaging facilities for large companies. However, many companies often do not understand the importance of machine maintenance and maintenance methods. The powder packaging machine must pay attention to daily maintenance and maintenance, because it will not only extend the service life of the equipment, but will not cause the equipment itself to malfunction. For the maintenance of powder packaging machines, here are a few suggestions:

1. Lubrication of oil lubrication: It is necessary to regularly lubricate the gear meshing positions, the bearing bearing oil filling holes and the moving parts, and once every shift, the speed reducer is strictly prohibited to run without oil. When filling the oil, be careful not to turn the tank on the rotating belt to prevent it from being damaged by slippage or premature aging of the belt.

Another point to note is that the gearhead must not be operated when there is no oil, and after the first 300 hours of operation, the interior of the washing machine is replaced with new oil, and then the oil is changed every 2500 hours. When adding oil, do not drop the oil on the drive belt, as this will cause the powder packing machine to slip and spin or the belt prematurely deteriorate.

2. Regular cleaning: After shutting down, it is necessary to clean the measuring part in time, and the heat sealer body should be cleaned frequently, especially for some granules with high sugar content, it is better to clean the turntable and the material door, heat sealer body. It is also a part that needs frequent cleaning to ensure that the finished product seal lines are clear. The scattered materials should be promptly cleaned in order to facilitate the cleanliness of the parts, so as to better extend the service life, and also to clean the electronic control box frequently. Dust so as to prevent electrical failure such as short circuit or poor contact.

3. Maintenance of the machine: Maintenance of the powder packaging machine is one of the keys to extend the life of the packaging machine, so always check the screws of the various parts of the powder packaging machine without loosening. Otherwise, it will affect the normal remote operation of the whole machine. For its electrical parts should pay attention to waterproof, moisture-proof, anti-corrosion, rat-proof, in order to ensure that the electrical control box and the terminal block clean, to prevent electrical failure, after the shutdown, the two heat sealer body should be in the open position, To prevent scalding packaging material.

The powder packaging machine occupies a very important position in the production and operation process of the company. Once the machine malfunctions, it will delay the production period. Therefore, the maintenance of the machine is very important. It is hoped that all enterprises will pay attention to it.