What are the custom tricks of the wardrobe?
[ Chinese wardrobe network ] A netizen broke the news, because I wanted to decorate my home's cloakroom. After some selection, I chose a whole wardrobe store to measure the door. After the master went to the door, the wardrobe and the receipt of the deposit were sent the next day. The netizen left his mind. He copied a copy of the data for the calculation of the area. He intended to calculate the balance and then pay the deposit. The result was really found. The surveying master did not know whether it was a mistake in the busy, actually the area of ​​the small door of the cabinet was counted as the area of ​​the entire wardrobe door, and the door of 60 cm height became 2.55 meters. As a result, the price of the wardrobe was also a lot more expensive.
First, the custom wardrobe area algorithm is complex, understand clearly and not suffer
In general, the calculation method of the custom closet area is calculated by the projected area and by the expanded area. The projected area is an early pricing method. The price is calculated according to the length, width and height of the cabinet shape. The depth is generally calculated according to the standard size of 6 cm. This calculation method ignores the amount of the partition material in the cabinet, which is relatively rigid. However, the accuracy of the calculation is relatively high.
According to the expansion area calculation, this pricing method requires the design to be determined before purchase, and the actual material area is calculated, that is, according to the expansion area of ​​the cabinet, cabinet door, cabinet board, etc., although the accuracy is in place, the calculation is complicated and the manpower is calculated. There is also a certain error in the measurement. This method of pricing is lower in unit price than in projection, but the final final price is likely to appear higher than the total budget price.
According to a survey report, about 57% of the calculated area is used in the custom closet, and about 39% of the projected area is used. 4% of them are calculated in Yanmi, and the meter is generally used for cabinet calculation. Therefore, it is used less in custom wardrobe pricing.
Second, custom wardrobes are more greasy, what are the JS tricks?
With the increasing number of consumers choosing custom wardrobes, various consumer traps about custom wardrobes are gradually emerging. Wardrobe dealer on a brand revealed that some businesses will use complex on computational methods to deceive consumers, and this one trick, it is hard to detect.
1. Many people think that it is convenient and cheaper to calculate according to the projected area. In fact, no matter which calculation method, there is no absolute saving. Some JS will tell consumers that the projection area calculation is more cost-effective, but in the actual production process of the wardrobe, consumers want to add a shelf, a hook, a slide and other accessories, they have to add extra money, if Without talking about these in advance, it is inevitable that JS will sit on the ground.
2, sitting on the scales, is a trick that many JS will use, especially when the expansion area is counted, the three items are added, and the complicated algorithm can easily confuse the consumers. Therefore, consumers must check the data provided by the merchants again. If there are two drawings, one without problems does not mean that the other is no problem, and the complicated drawings are even less careless.
Foshan Qiaotai Furniture Products Co., Ltd. , https://www.qiaotaifurniture.com