How to choose a walk-in closet
[ Chinese wardrobe net ] In the bedroom, the cloakroom is made by closing one wall. The size of the cloakroom can be determined according to the length of the wall. Some customers call it an in-wall cloakroom; if the bedroom is large enough Large, you can design a closed cabin, which becomes a walk-in closet. This combination coat rack is very popular nowadays, not only because it is very practical, but also has sufficient advantages in terms of price.
How to choose a walk-in closet
The door of the walk-in cloakroom is generally designed as a sliding door. For the sliding door of the cloakroom, the doors made by the general manufacturers are single-sided doors, and the side in the cloakroom is designed as a mirror, so that the functions of the doors are different and strengthened. The effect of the cloakroom.
Walk-in closet area at least 4--5 square meters
The house is big and the natural design is more perfect. At this time, the walk-in cloakroom is just right for people to look at. This is by no means an accident. This way does have its ingenuity. It has designed a private space that is completely owned by oneself. Especially for ladies who love beauty, they need a storage space for their own clothes. The walk-in closet is usually a closed space with a sliding door outside.
This method is very popular. Some units have designed a walk-in cloakroom for the head of the household, while others have "sealed" a room or a certain place in the house to make a cloakroom. Either way, the size of the cloakroom should generally be between 4 and 5 square meters to ensure its use.
How to buy and build such a cloakroom?
1, calculate the price of the combination wardrobe
In general, manufacturers have two algorithms: one is based on the expanded area, and the other is based on the front projected area. The front projection area is relatively simple, that is, the length of the cabinet is high, and the consumer can easily calculate it by himself; while the method of calculating the area of ​​expansion is calculated according to the area of ​​the cabinet, and the area of ​​each partition is calculated separately. It is more complicated. At present, the price calculated by the exhibition meter is generally between 160 yuan and 250 yuan per square meter. The simpler method is to multiply the price of the expanded area by 2.5 times. This is just an approximation algorithm, which cannot be said to be very accurate. Can be converted according to their actual situation.
According to an industry insider, consumers who are less than 260 yuan / square meter, consumers should not consider, although cheaper, but the appearance is rough, the structure is not solid, it may be scrapped in two years, it is better to spend more Money to buy a practical.
2, combination wardrobe VS buy a large wardrobe
Wardrobes are usually the must-have bedroom furniture. Generally speaking, each family's bedroom will have different styles. The biggest advantage of a large wardrobe is that it can be consistent with other furniture styles without deviation. However, in the case of a large wardrobe using a sliding door, the door changes very little, which can be seen from the frame material, which is basically a 5 mm aluminum alloy, which limits its change.
3, combination wardrobe VS homemade wardrobe
When many friends are looking for decoration company decoration, they all ask the decoration team to make some cabinets, which is the "boxing cabinet" that is usually said. What is the difference between the cabinet made by the decoration team and the whole wardrobe sold by the building materials city?
Through consultation, I found that these two methods are different, and some are not satisfactory. The cabinet made by the decoration company can be closely combined with the wall to make no gaps. This wall can only be found only by “field†measurement. For the cabinet made by the furniture factory, it is generally not so close to the wall. In combination, there will always be more or less gaps, and there will be a "dead angle" in use, which is ugly and difficult to clean.
On the other hand, the cabinets made by the decoration company generally use large core boards, and then they are attached with wallpaper or decorative boards. The appearance can be very beautiful, very individual and strong. However, the cabinets made of large core plates are often made by hand. Basically, the connection of the cabinets is mainly nails, and the locks are often inaccurate. Such connections are generally of good quality, the nails are easy to loose, and the natural cabinets are not. It will be very strong, and the quality of the cabinet will naturally not catch up with the cabinets and sliding doors made by professional furniture factories.
In terms of price, the money spent on these two methods is comparable. The decoration company usually charges about 450 yuan/square meter. The price of the furniture factory is also high and low. The cabinet of 300 yuan/square meter can be used with confidence. It is.
Here are some suggestions for friends who like traditional wardrobes:
1. Look at the quality of the cabinet, the most important thing is to look at the edge of the board, the machine edge is generally uniform, and the hand-sealing will have some rough, large furniture factories generally use machine edge sealing.
2. Select the cabinet, must choose the brand, the brand cabinet, the quality is guaranteed, and some small manufacturers use a few boards to make up for it, they can be sold as a wardrobe, such a manufacturer has a problem and then look for it, I am afraid it will be difficult.
3. For the price of the cabinet, first ask the manufacturer's calculation method, and then ask the items included in the cost, such as whether or not the drawer is included. (The usual area algorithm does not include the cost of the drawer. The algorithm for the projected area may include Can not include), whether it includes the cost of the backboard, etc.
Structural design and door cooperation
Secondly, the side panels on both sides should have enough fixing plates to support it to avoid deformation of the side panels. For example, a small cabinet for socks and sundries can be designed on one side of the side panel instead of the inner side, so that the side panel can be reinforced. Third, the span of each cabinet should not be greater than 1 meter, that is, the distance of 80 to 90 cm is most suitable, otherwise the long board is easy to bend and deform.
Pay special attention to the cooperation between the cabinet structure and the door when designing the combination wardrobe. First of all, whether it is for the manufacturer or the decoration company to make the cabinet, the position of the drawer must be determined by the manufacturer who makes the door. Generally, the drawer should be reserved for a certain distance. This distance is determined by the position of the door, so that it will not be played. Do not open the door, or do not open the drawer.
Our main product is : nylon cooking utensil , stainless steel kitchen utensil , kitchen grater. The stainless steel of our products can be in18/10 (AISI 316); 18/8 (AISI 304) and 18/0 (AISI 430)which are safe for touching food directly and we get SGS food safe test for our goods: LFGB for the whole European market ; FDA for North and South American market.We get our own design, meanwhile OEM is welcome, we can do not only the whole cutlery in stainless steel, but also can do colorful plastic handle; wooden handle . Your logo can be embossed; engraved; imprint and lasered. The finish of the cutlery we get mirror polish; matt polish; satin polish and also tumble polish(Machine polish).
Kitchen Tools,Knife Sharpener,Kitchen Utensils,Cooking Utensils,Vegetable Peeler,Wooden Grill Scraper,Vegetable Chopper
MEO DEMO CO., LTD. , https://www.meokitchenknives.com