Wangchang printing machine data standard
Today's CTP machine common problems and treatment methods are as follows: speed of the plate machine: in the case of CTP energy standards, the version has a blue bottom. Adjustable wiper machine speed; Roughing machine barbing pressure This method is rarely used, in the case that the above 1-2 are invalid, the pressure of the stick can be adjusted appropriately. This article will introduce you to the Wangchang processor. Data standard.
The reason for the failure of the platen machine is that there is an abnormal problem in the control circuit board. The specific performance is that the output voltage of the control circuit board is sometimes absent, which causes the function of the plate processor to be abnormal. In this regard, the usual solution is to replace the control circuit board, and install an auxiliary circuit system outside the circuit part where the failure occurs, that is, an auxiliary circuit system in which a photoelectric probe is installed at the entrance of the printing plate into the printing machine.
The thermal type plate-making machine adopts a fine microcomputer control system to control the data of flushing time, liquid medicine and drying temperature, circulation filtration, cleaning rubber roller, secondary glue washing and non-glue, etc. A variety of methods, such as random correction, can be selected. When the plate processor is enabled, first check whether the circulation pump works normally, whether the interfaces and pipes are leaking, and ensure that the gears of each component are operating normally. After use, turn off the power and water, and use a cleaning bottle to rinse off the liquid crystal attached to the roller shaft and gear.
The manufacturing company has developed and produced a special cleaning agent for the plate-making machine, which is used for cleaning the surface crystallization of the rubber roller in the plate-making machine and crystallization of the inner wall of the tank, and the effect is good. The product here is generally a composite strong acid software salt granule, or a liquid concentrate cleaning agent, which is specially used for the dirt treatment of the PS plate developing machine, and is non-corrosive to the mechanical and rubber rollers and the brush.
Article source address: http://
Toner Cartridge For Canon,Best Canon Toner Cartridge,Compatible Laser Toner Cartridge,Premium Compatible Toner Cartridge
jiangmen jinheng office equipment Co. Ltd. , https://www.jmjhtonercartridge.com