Which is better for the MDF and the solid wood particle board?
[ Chinese wardrobe network ] "Do custom-made wardrobes use MDF? Or use solid wood particle board?" Consumers often issue such questions. There are various kinds of customized products on the market, and the materials used are various. Some manufacturers say that the MDF board is good, and some say that the solid wood particle board is good. Consumers are often confused in the process of selection. Xiaobian teaches you to be a savvy consumer, let you know the identity of the pedestrians in the identity of the pedestrians to customize your own wardrobe.
The so-called "specialization of the industry", the choice of sheet is the same. Each plate has its advantages and disadvantages, there is no inevitable good or bad, the key is to use where and how to use it reasonably. Below, let us understand the advantages and disadvantages of MDF and solid wood particle board, to develop strengths and avoid weaknesses, to reasonably match, to customize the wardrobe with stylish appearance and green environmental protection.
The MDF is also a MDF. It is a kind of artificial board made of wood fiber or other plant fiber, which is crushed, separated by fiber, dried and then coated with urea-formaldehyde resin or other suitable adhesive. .
Advantage 1: The material is relatively thin, and the cut surface will be well sealed when it is edged, so it is not easy to open the glue.
Advantage 2: It is easy to press into various shapes, so there are usually more door panels or back panels.
Less than one: Because the substrate is powdered as the raw material, the glue used is more than the particle board, and the environmental performance of some non-standard small workshops is relatively low.
Less than two: due to the high glue content of the MDF, the internal structure space is small, and the moisture resistance is poor.
In addition, solid wood particle board is a kind of shredded material made of wood or other lignocellulosic material, and the artificial board is glued under the action of heat and pressure after applying the adhesive. The principle is the same as the MDF.
Advantage 1: The inside of the solid wood particle board is a granular shape with a cross-stack structure. Therefore, the nail holding power is good, and the nails and screws can be nailed. These mountable performances are significantly better than MDF.
Advantage 2: More retains the essence of natural wood. The content of solid wood particle board is generally less than 5% in the use of adhesives, and environmental protection is better.
Advantage 3: The solid wood particle board has small warpage deformation, good dimensional stability, high strength, good stiffness, and it is not easy to bend when hanging heavy clothes.
Less than one: the flatness of solid wood particle board is relatively inferior to that of MDF, and it is relatively difficult to make curvature and shape.
Understand the advantages and disadvantages of the two types of plates, I believe you already know how to choose which kind of plate to customize the wardrobe you want!
Round Kids' Table,Rectangle Kids' Tables,Plastic Kids' Chairs,S Shape Chair
Ningbo Realever Enterprise Limited , https://www.realeverfurnishing.com