Low-temperature bath, also known as cryogenic water bath cycle

Shanghai Xinzhuang Instrument Co., Ltd. develops the LNB brand cryogenic temperature bath, which is energy-saving and environmentally friendly, and leads the domestic market. Professional manufacturing is more secure and affordable

Low-temperature constant temperature bath, also known as low-temperature constant-temperature water bath cycle, is a high-precision constant-temperature source with dual functions of heating and cooling. Circulating pump is equipped with the function of liquid circulation. According to the different size of the notch, constant temperature experiment can be carried out in the bath. It can also be connected with other equipments through the hose and used with the constant temperature source. Internal circulation: The continuous circulation of the liquid medium in the tank by the circulation pump increases the uniformity of temperature and temperature in the tank and reduces temperature fluctuations. External circulation: Through the circulation of the circulation pump, the outlet hose is used to connect the insulated hose with external equipment to form a closed loop and return to the inlet of the equipment. This is to draw the constant temperature fluid inside the tank and establish an external constant temperature field. Widely used in petroleum, chemical, metallurgical, pharmaceutical, biochemical, physical properties, testing and chemical analysis and other research departments, institutions of higher learning, factory laboratories and measurement quality inspection departments. It is also commonly used in the medical field, biochemical field, materialization field, material field, various matching cooling or heating equipments.

Box structure and materials 1. Super constant temperature sink box body consists of cold plate spray shell, insulation layer, stainless steel liner, stainless steel heater heating, circulation pump box inside the box to use the more uniform temperature, but also through the circulation pump The circulation function uses the water outlet to connect the heat preservation hose and external equipment to form a closed circuit and return to the equipment water inlet. It is the outside temperature of the tank and leads to establish the external temperature field. 2. The outer box material: the outer box adopts High-quality cold plate treated with phosphate film after high temperature spray, stainless steel door cover structure 3. Studio material: stainless steel tank 4. Temperature measurement port: PT100 sensor enters from the top of the tank 5. Power cord: The power cord is on the back of the instrument Controller position 6. Controller: Located in the upper part of the instrument, with built-in control system, compensating wire connection PT100 sensor 7. Heating element: Stainless steel electric heater 8. Refrigeration element: high-efficiency compressor, built-in control system, compensation wire connection PT100 sensor