Thermostar Thermal Plate

This plate is characterized by its simplicity and without the need for a preheated rinse system. The printing plate can only be processed by the traditional positive plate plater. The developing portion of the plater needs two brushes. This simplified rinsing procedure effectively improves the reliability of the printing plate and the stability during printing. The blunt medicine used is also similar to that used for general positive plates. Moreover, this thermal plate can be processed in sunlight to bring the greatest convenience to users.

The use of a wide range of use with different plate-making machine design, such as inner drum type, outer drum type and platform type, but also to maintain quality, Thermostar plate has two models:

· P970: Redline laser diode for 830nm, and · P971: High sensitivity for FD-YAG laser at 1064nm. At the same time, this plate uses polymer as the main material and has higher sensitivity than the plate in the market. Degrees, make the plate more productive when exposed.

· P970: 50mJ/cm2 energy at 830 nm laser (laser at 2.2 meters per second)
· P971: 50mJ/cm2 energy at 1064 nm laser (laser advances at 360 meters per second)

Outstanding Operational Safety This printing plate uses a positive-working plate-making process, which has excellent results and no thermal erosion during the exposure process. It does not endanger the health of the operator or contaminate the optical system of the plate-making machine. Agfa's thermal version also combines high contrast and consistent screen performance (from 1% to 99%, 200 lines per inch).

Good printing performance Thermostar plate has good lithographic performance and a wide latitude. It can be mixed with traditional plates without changing the press settings. The printing number of this plate is up to 150,000. If it is dried, it can be increased to more than one million.