Solving the problem of elongation of electronic tensile testing machine

Step 1: Check displacement sensor of electronic tensile testing machine

Because the electronic tensile testing machine system is a closed-loop system, to determine which part of the system is faulty, first disconnect the loop in the system to make the system an open-loop system. If the sensor signal is judged to be normal, the displacement sensor must be disconnected. The feedback signal makes the system an open loop. At this time, a control actuator movement signal is sent from the workstation, and then the sensor feedback value is measured.After repeated several times, when the measured feedback data of the sensor is a linearly changing straight line, the sensor is determined. normal.

Step 2: Check the amplifier unit of the electronic tensile testing machine

After eliminating the fault of the displacement sensor, check whether the amplifier unit is normal. First disconnect the output signal of the amplifier unit. Remove the output wiring, and then add a DC input signal to the amplifier unit through the workstation, and measure the output of the amplifier unit. Repeat After several times, the measured output signal of the amplifier unit becomes a linear change trend to determine that the amplifier unit is normal.

Step 3: Check the system settings of the electronic tensile testing machine

The display in the workstation found that the stroke of the actuator is only ± 10mm, which should be ± 50mm under normal circumstances. It is considered that there is a problem with the system setting, and the system needs to be reset. After resetting the stroke of the actuator to ± 50mm, after The display value on the display panel of the workstation is still not correct, so it is believed that this fault can be resolved only by re-marking the positioning system.

Printed Tape

Printed Packing Tape is used for sealing, decorate, warning, diy project and design. It is a good advertisement way. Could print any picture, logo, words on it. The thickness of washi tape is from 43 to 60 micron, the width is from 24mm to 72mm, the length is 35 to 1000 yards. Could make custom printing tape.

Printed Tape

Printed Tape,Custom Packaging Tape,Printed Packaging Tape,Branded Packing Tape

Dongguan Yalan Packing Materials Co., Ltd. , https://www.yalanpack.com