Vibration test bench 4 troubleshooting methods

Vibration tester will encounter some problems in the process of operation, how to solve, Dongguan Haida Instruments company takes you to understand.

    First, can not stop after setting time

    1. Check if the operation steps are set correctly. Follow the instructions again.

    2. Check if the internal code is correct. Check the parameter list and check it again.

    3 , shut down, reset the internal code, re-set according to the operating procedure

    Second, when the desk body work abnormal sound

    1. The abnormal sound of the contact surface of the test article is bound to the naked eye. Please re-bind or check the body.

    2. Check whether the spring steel sheet inside the table body is broken. If the size is good (length, width and thickness), you can tell the manufacturer to send it to your company.

    Third, the vibration test bench can not be connected to computer control (with microcomputer models)

    1 , check RS232 wiring connection is connected and good contact, re-connected once

    2 , check the control box power switch is turned on, if not open, press to turn ON (ie, turn on the power)

    3 , check whether the computer peripheral connection is properly connected, reconnect and confirm again

    4 , check RS232 serial computer settings are COM1 or COM2 , replace the settings

    5 , whether the correct opening of the program screen and correct settings, refer to the instructions set by the microcomputer instructions

    Fourth, some numbers appear in the computer program and prompt contact Yashilin company to provide authorization code

    1. Confirm whether your company has added other external equipment or other functions to your computer

    2. Check if the computer is working normally (do not work with the vibration table)

    3 , check the communication line is broken or insulation peeling

    4. Vibration test rig may be caused by personnel problems or self-modification resulting in the loss of system files or forgetting passwords. In this case, contact the manufacturer and send it back to the host computer to reset.