Precautions for drop test machine
The drop test machine is a test device for testing the drop resistance and drop resistance of the product. The main performance requirements, test procedures and test reports of the test equipment used in the vertical impact test of the transport package are subject to vertical impact. The impact strength at the time and the packaging's ability to protect the contents.
What are the precautions and maintenance of the drop test machine?
Matters needing attention and maintenance:
1. After each test is completed, the drop arm must be dropped to prevent the long-reset drop arm from pulling the spring and deforming it, which affects the test effect. Before each drop, please reset the position and stop the motor before pressing the drop button;
2. After the new machine is installed at the factory, it is necessary to add appropriate low-concentration oil to the sliding round bar. It is strictly forbidden to add anti-rust oil or high-concentration oil and corrosive oil with backlog).
3. If there is too much dust in the oiling place for a long time, please lower the machine to the bottom, wipe the previous engine oil, and then re-oil the machine;
4. The drop table is an impact mechanical device. When the new machine is used more than 500 times, the screws must be tightened once to avoid failure.
5. Do not stand on the drop panel when operating the device (inside the warning line)
Flower Essential Oil,Rose Essential Oil,Lavender Oil,Rosemary Oil
Ji'An ZhongXiang Natural Plants Co.,Ltd. , https://www.zxessentialoil.com